‎

Hits harder, travels fastest

No Gas Headaches, Greater Control

35 min of runtime, 5,000 sqft per charge

Multi-direction capability for easier operation

Fast / slow speed control

Instant power w/ push button start

Foldable handlebar for safe jobsite transportation and efficient storage

Ergonomic handles for multiple person lifts

Accessories Available: Wheel Kit, Paver Pad, and Water Tank

ONE-KEY™ compatible: track and manage

2-year equipment warranty & 2-year battery warranty

65 minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 on the MX FUEL™ Super Charger

Both the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 Battery & MX FUEL™ Super Charger are COOL-CYCLE™ Capable, delivering high-speed cooling for less downtime

Fully Compatible with the MX FUEL™ Equipment System

Hits Harder, Travels Fastest

No Gas Headaches, Greater Control

25 min of Runtime, Over 1/4 Mile Per Charge

AUTOSTOP™ Control for Enhanced Safety

Impact force: 3,799lbf

Centralized user interface mounted on handlebar

Start/Stop and Fast/Slow controls

Instant power with push button starts

No emissions, no engine maintenance

ONE-KEY™ compatible: track and manage

2-year equipment warranty & 2-year battery warranty

65-minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 on the MX FUEL™ Super Charger

Both the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 Battery & MX FUEL™ Super Charger are COOL-CYCLE™ Capable, delivering high-speed cooling for less downtime

Fully Compatible with the MX FUEL™ Equipment System

No Generator, Pumps Anywhere.

Shuts Off At 2" w/ Auto-Mode

40 mins, 2,800 Gallons Per Charge on Auto-Mode

More Efficient Pumping With Three modes (High, Auto, and Low)

Auto-Mode: Automatically senses and adjusts to incoming flow rate

High Mode: 27 Mins, Up to 2,200 Gallons per Charge

Low Mode: 110 Mins, Up to 5,200 Gallons Per Charge

Remote Notifications: Pump & Battery Status, Pumping Modes

Portable Pump Power Base, Backpack Harness & Remote Included

Integrated Tether & Pump Cord - 35ft Length

Max Flow Rate: 82 gpm

POWERSTATE™ brushless motor provides more power, more run-time, and longer life

2-year equipment warranty & 2-year battery warranty​

Both the MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 Battery & MX FUEL™ Rapid Charger are COOL-CYCLE™ Capable, delivering high-speed cooling for less downtime.

Fully compatible with the MX FUEL™ Equipment System

14” gas performance, No gas headaches

RAPIDSTOP™ Blade Brake & Kickback Control

14 ft in concrete, 120 cuts in #5 rebar per charge

Push button start

Load light indicator

No emissions

No mixing gas and oil

No engine maintenance

Onboard electric water valve

Fully compatible with the MX FUEL Equipment system

2-year tool & battery warranty

45-minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 on the MX FUEL™ Super Charger

Both the MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 Battery & MX FUEL™ Super Charger are COOL-CYCLE™ Capable, delivering high-speed cooling for less downtime

Cut up to 1-1/2” depth on 6” blade

No pull start, no emissions, no engine maintenance

160 ft per charge at max depth

Lever on handlebars to raise and lower guide arm

Blade depth adjustment for accurate cuts at varying depths

Handlebar height adjustment for increased comfort

¾ speed mode to break in new blades

Compatible with Husqvarna 6” Soff-Cut blades

LED lights at blade level for increased visibility

ONE-KEY™ compatible to track and manage

2-year equipment warranty & 2-year battery warranty

Includes: (1) MX FUEL™ 6” Green Concrete Saw, (2) MX FUEL™ REDLITHIUM™ 8.0 Batteries, (1) MX FUEL™ Supercharger

Fully compatible with the MX FUEL™ Equipment System

45 minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 on the MX FUEL™ Super Charger

Both the MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 Battery & MX FUEL™ Super Charger are COOL-CYCLE™ Capable, delivering high-speed cooling for less downtime

Power to Push 2-1/2” Head

Eliminates Extension Cords, No Tripping Hazards

Consolidate up to 45 yds³ per charge w/ 2” head & 14’ Shaft

11,200 VPM; Consistently sustains above 10,000 VPM

Instant Power w/ Push Button Start

Accepts shafts 7’-21’

Lanyard hook for use when working at heights

Compatible with Oztec heads & shafts

Easier to use with Wireless Remote

Shoulder strap included for convenient carry options.

Fully Compatible with the MX FUEL™ Equipment System

2 Year Equipment Warranty & 2 Year Battery Warranty

Compatible with ONE-KEY™ to Track and Manage

Most Powerful, Most Consistent Consolidation

Fastest Setup

130 yds³ Per Charge, w/ 7' Whip / 1.75" Head

11,500 VPM in the Stiffest Concrete; Consistently Sustains Above 10,000 VPM

Only compatible with MX FUEL™ High Cycle Concrete Vibrator Whips w/ Heads sold separately

Instant Power w/ Push Button Start

Easier to use with Wireless Remote

Includes: (1) MX FUEL™ High Cycle Concrete Vibrator, (2) MX FUEL™ REDLITHIUM™ 8.0 Batteries, (1) MX FUEL™ Supercharger and Remote

45-minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 on the MX FUEL™ Super Charger

2-year equipment warranty & 2-year battery warranty

Both the MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 Battery & MX FUEL™ Super Charger are COOL-CYCLE™ Capable, delivering high-speed cooling for less downtime

Fully compatible with the MX FUEL™ Equipment System

ONE-KEY™ compatible to track and manage​

Power to Push 2-1/2” Head

No Pull Start, No Gas, No Engine Maintenance

Consolidate up to 70 yds³ per charge w/ 1-1/2” head & 7’ Shaft

11,200 VPM; Consistently sustains above 10,000 VPM

Consistent Starts, Most Reliable Pours

For use with MX FUEL™ Concrete Vibrator Heads & Shafts

Accepts shafts 7’-21’

Easier to use with Wireless Remote

Easily Remove Backpack Harness for walls and columns

Instant Power w/ Push Button Start

2 Year Equipment Warranty & 2 Year Battery Warranty

Compatible with ONE-KEY™ to track and manage

Includes two MX FUEL™ REDLITHIUM™ XC406 Battery Packs

Compatible with Oztec heads & shafts

Fully Compatible with the MX FUEL™ Equipment System

Power to pull 16' bar

No Pull Start, No Gas, No Engine Maintenance

2 hours per charge w/ 12' bar

Accepts 4' - 16' bars on one motor

Compatible with MBW screed bars

Instant Power w/ Push Button Start

Clamp design for easy bar attachment and removal

Consistent Starts, Most Reliable Pours

Compatible with ONE-KEY™ to Track and Manage

2 Year Equipment Warranty & 2 Year Battery Warranty

Includes two MX FUEL™ REDLITHIUM CP203 Battery Packs

Fully Compatible with the MX FUEL™ Equipment System

5 HP performance ​

No Gas Headaches

35 min of runtime per charge​

Max blade speed: 160 RPM​

Handlebar height adjustment for increased comfort ​

Fine pitch dial for precise blade pitch adjustment​

Lift hook for increased maneuverability on the jobsite ​

Includes: (1) MX FUEL™ 24” Walk- Behind Edging Trowel, (2) MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 Battery Packs, and (1) MX FUEL™ Super Charger​

65 minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 on the MX FUEL™ Super Charger

2-year equipment warranty & 2-year battery warranty​

Both the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 Battery & MX FUEL™ Super Charger are COOL-CYCLE™ Capable, delivering high-speed cooling for less downtime

Fully compatible with the MX FUEL™ Equipment System​

5HP performance ​

No Gas Headaches

25 min of runtime per charge​

Max blade speed: 130 RPM​

Handlebar height adjustment for increased comfort ​

Fine pitch dial for precise blade pitch adjustment​

Lift hook for increased maneuverability on the jobsite ​

Includes: (1) MX FUEL™ 36” Walk- Behind Trowel, (3) MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 Battery Packs, and (1) MX FUEL™ Supercharger​

65 minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 on the MX FUEL™ Super Charger

2-year equipment warranty & 2-year battery warranty​

Both the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 Battery & MX FUEL™ Super Charger are COOL-CYCLE™ Capable, delivering high-speed cooling for less downtime

Fully compatible with the MX FUEL™ Equipment System​

ONE-KEY™ compatible to track and manage​

Pressure Gauge

Optimize performance for different applications

AUTOSTOP™ kickback control prevents severe kickback

ONE-KEY™ technology allows for tracking, tool security, and inventory management

water line and quick connect end for wet applications

On-Board Work Lights

LED leveling system helps users maintain accuracy through the application

Pressure Gauge

Optimize performance for different applications

AUTOSTOP™ kickback control prevents severe kickback

ONE-KEY™ technology allows for tracking, tool security, and inventory management

water line and quick connect end for wet applications

On-Board Work Lights

LED leveling system helps users maintain accuracy through the application

Limits excess vibration and provides a comfortable grip while operating

Demolishes the most concrete per unit of time while maintaining the lowest vibration in class

Lightest weight breaker in class

Can break 2 tons of material per battery charge with MX FUEL XC Battery

Delivers harder hitting performance with less vibration and weight

Provides light at the chisel point in dark applications

For easier transportation and maneuvering throughout the job site

Maximum durability for the most demanding demo applications

ONE-KEY™ Compatible: Ability to Track and Manage tools for increased productivity and investment protection

4.9m/s² Vibration

50 Ft/Lbs of Impact Energy

POWERTREDZ™ Lift Assist

Power To Clear Roots At 200'; Mess Contained

Fully Compatible with the MX FUEL™ Equipment System

Clears 3” up to 8” Sewer Lateral lines

MX FUEL™ REDLITHIUM™ CP203 Battery powers through multiple jobs on a single charge, bringing cordless mobility, saftey, and power supply to the drain cleaning industry

Integrated Drum Brake stops drum from spinning quickly after pedal is released

CABLE DRIVE™ Automatic Feed and Retract

RAPID STOP™ Release of CABLE DRIVE™ Bearings

Utilizes 5/8" & 3/4" Inner Core Cables

Connect Two Drums Together to Get 200' Capacity

Power To Clear Roots At 200'

Mess Contained; Instant Setup

Fully Compatible with the MX FUEL™ Equipment System

Clears 3” up to 8” Sewer Lateral lines

Drum Capacity: 100ft of 5/8" or 3/4" Cable

Add Additional Cable or Connect Two Machines Together to Get 200' Capacity

MX FUEL™ REDLITHIUM™ CP203 Battery powers through multiple jobs on a single charge, bringing cordless mobility, saftey, and power supply to the drain cleaning industry

Integrated Drum Brake stops drum from spinning quickly after pedal is released

CABLE DRIVE™ Automatic Feed and Retract

RAPID STOP™ Release of CABLE DRIVE™ Bearings

Utilizes 5/8" & 3/4" Inner Core Cables

ONE-KEY™ capable

Easiest Transport, Work Anywhere

Faster, Set Up to Clean Up

Up to (140) ¾” Threads Per Charge

Threads up to 2” pipes

Threads several materials including black iron pipe, stainless steel, rigid metal conduit (RMC) and more

Compatible with most roll grooving tools

Self contained oil reservoir reduces mess

Durable spring assisted cart allows for easy transportation and set up around the jobsite

Additional rear hammer chuck enables fast transitions between threading and grooving

Durable all metal housing construction

Micro-Adjust enables the easiest, most controlled die adjustments for consistent quality threads

ONE-KEY™ technology allows for tracking, tool security, and inventory management

POWERSTATE™ brushless motor provides more power, more run-time, and longer life

REDLINK PLUS™ intelligence enables advanced communication between batteries and tools for unmatched performance, protection, and productivity.

15,000 Lumens for Task and Area Lighting

Over 2,300 ft² of Coverage at 0.5+ ft-c

Compatible with PACKOUT™ Modular Storage System for Easy Transport On & Off the Jobsite

Compact Size and Weight Delivers Maximum Portability

7 Foot Mast Deploys in Seconds

IP56: Water & Dust Protection

Dual Power: Powered by MX FUEL™ or Extension Cord

2 Deployable Outriggers for Increased Stability

Oversized Carry Handle for Easier Carrying

MX FUEL™ Battery is Protected in a Lockable and Sealed Compartment

ONE-KEY™ Bluetooth Card Enables Tracking, Tool Security and Inventory Management

Fully Compatible with the MX FUEL™ Equipment System

Easier transportation, superior ergonomics

Integrated charger and battery storage

Reinforced base

Durable steel tube design

Lighter Tool Weight, Less Fatigue

Maintains Peak Performance

Fits All MX FUEL™ Batteries

Up to 45% less MX FUEL™ Equipment weight

Backpack Harness and integrated carrying handle for easy transport

8’ Tether Adapter fits all MX FUEL™ Equipment

Easily remove Backpack Harness for stationary use

Includes 8’ Tether Adapter (1008)

Includes Backpack Harness Kit (1000)

2 Year Equipment Warranty

3600 Peak Watts and 1800 Running Watts for High Draw Tools

Pure Sine Inverter Protects Sensitive Electronics

No Emissions and Durable Roll Cage, Indoor or Outdoor​ Use

Ground Fault Isolated for Jobsite Use

Powered by 1 Battery or 2 to Double the Runtime

Integrated Charger to Charge up to Two MX FUEL™ Batteries

Push Button Start. No Pull Starts.

Compact Footprint for Use in Any Workspace

Compatible with ONE-KEY™ to Track and Manage

Fuel gauge onboard, displays remaining runtime for less downtime on the job

Carrying Handle

Rubber Overmold

Fully compatible with all MX FUEL™ equipment

Fuel gauge onboard, displays remaining runtime for less downtime on the job

Carrying Handle

Rubber Overmold

5X More Protective Rubber Overmold in Impact Zones

REDLINK™ Intelligence: Optimizes performance, compatibility, and battery lifespan

Capable of charging in 90 minutes

33% more runtime vs. MX FUEL™ REDLITHIUM™ XC406 (XC6.0) in a lighter weight design.

45 min charge with the MX FUEL™ Super Charger

COOL-CYCLE™ Capable. COOL-CYCLE™ Active Cooling System provides high speed cooling for less downtime

Longest life for the most recharges and best performance over the life of the pack ​​

REDLITHIUM™ FORGE™ provides the most powerful, fastest charging, and longest life batteries within REDLITHIUM™ ​

Best protection from jobsite, weather, and environmental conditions ​​

Compatible with all MX FUEL™ equipment and chargers​

Upgraded venting design for max cooling with COOL-CYCLE™ capable chargers ​

Active cooling feature works with chargers that have COOL-CYCLE™ capability ​

ONE-KEY™ compatible: Ability to customize, track, and manage tools for increased productivity and protection of users investment

Improved handle design for easy carrying ​

5X more rubber overmold in impact zones for maximum protection​

Onboard fuel gauge displays remaining charge​

2-year warranty​

Includes: 1 MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 battery pack​

2X more runtime vs. MX FUEL™ REDLITHIUM™ XC406 (XC6.0)

65 minute charge with the MX FUEL™ Super Charger

COOL-CYCLE™ Active Cooling System is capable of providing high-speed cooling ​for less downtime

Longest life for the most recharges and best performance over the life of the pack ​

REDLITHIUM™ FORGE™ provides the most power, fastest charging, and longest life batteries within REDLITHIUM™

Compatible with all MX FUEL™ equipment and chargers

Best protection from jobsite, weather, and environmental conditions ​

Upgraded venting design for max airflow from COOL-CYCLE™ capable chargers

Active cooling feature works with chargers that have COOL-CYCLE™ capability ​

ONE-KEY™ compatible: Ability to customize, track, and manage tools for increased productivity and protection of users investment

Improved handle design for easy carrying ​

5X more rubber overmold in impact zones for maximum protection​

Onboard fuel gauge displays remaining charge​

2-year warranty​

Includes: (1) MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 battery pack​

2X more runtime with MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 vs MX FUEL™ XC406 (XC6.0)

65 minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 and Super Charger

Full battery & charger compatibility with the entire MX FUEL™ equipment system

REDLITHIUM™ FORGE™ batteries provides the most power, fastest charging and longest life

Super Chargers are Milwaukee’s fast chargers for MX FUEL™ batteries

Both the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 & MX FUEL™ Super Charger are COOL-CYCLE™ Capable

COOL-CYCLE™ Active Cooling System is capable of providing high-speed cooling for less downtime

Active cooling feature works with chargers and batteries that have COOL-CYCLE™ capability

REDLINK™ Intelligence: Our circuitry provides optimized performance and overload protection using total system communication between tool, battery, and charger

Both the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 & MX FUEL™ Super Charger are ONE-KEY™ compatible: ability to customize, track, and manage tools for increased productivity and protection of users investment

MX FUEL™ Super Charger features ONE-KEY™ with adjustable wattage to maximize outlet power onsite

2 year battery warranty, 2 year charger warranty

Kit Includes: (1) MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 & (1) MX FUEL™ Super Charger

Charge Up to 2X Faster vs MX FUEL™ Standard Charger

Charge MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 in 65 Minutes; Charge MX FUEL™ REDLITHIUM™ FORGE™ XC 8.0 in 45 Minutes

COOL-CYCLE™ Active Cooling System provides high-speed cooling for less downtime. Active cooling feature works with batteries that have COOL-CYCLE™ capability.

Compatible with all MX FUEL ™ Batteries

Charge MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 in 65 Minutes

Charge MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 in 45 Minutes

Charge MX FUEL™ XC6.0 in 45 Minutes

Integrated ONE-KEY™ for tracking, management, and adjustable wattage feature

REDLINK™ Intelligence: Charger communicates with the battery pack to ensure optimized performance and maximize runtime

Integrated carrying handle

Single port

Power Source: AC

2 Year Warranty

Includes (1) MX FUEL™ Super Charger

Charges All MX FUEL™ Batteries

Charges MX FUEL™ REDLITHIUM™ XC406 Battery in 90 Minutes

Charges MX FUEL™ REDLITHIUM™ CP203 Battery in 45 Minutes

REDLINK™ Intelligence: optimizes charge rates based on battery type and temperature providing the best combinations of charge time and pack lifespan

Internal Fan: Maximizes Charger Performance and Lifespan

On-Board Charge Indicator

Integrated Carry Handle

AC Charger

Single Port

2 year Warranty