Work smarter, not harder contest

Plumber/Mechanical Prize Pack

M12™ FORCE LOGIC™ Press Tool Kit with Jaws

( 2473-22 )

The M12™ FORCE LOGIC™ Press Tool is the single lightest press tool in the market today and represents a new level in portability and accessibility around installed pipe.  Featuring a one-handed, in-line design, the M12™ FORCE LOGIC™ Press Tool will operate nearly anywhere you can fit your arm.  Utilizing Milwaukee® REDLINK™ Electronics, the M12™ FORCE LOGIC™ Press Tool monitors the force output to ensure quality connections and provide the user peace of mind by visually indicating both a secure connection and when the tool needs calibration. Featuring the best calibration standard in the industry, the tool only require service every 32,000 crimps. This allows users up to 4X more connections between services, keeping the tool on the jobsite up to 4X longer than competitive units.  When used with M12™ FORCE LOGIC™ Press Jaws this tool delivers quality press connections on all major fitting brands including Viega®  ProPress™ Systems, Elkhart®  APOLLOXPRESS™, and Grinnell®  G-Press copper systems.  Powered by the M12™ REDLITHIUM battery means this is the only press system where you can Cut, Fasten and Connect on One System.

M12™ Cordless Copper Tubing Cutter (Tool Only)

( 2471-20 )

Our M12™ Copper Tubing Cutter cuts up to 10X faster than conventional cutters and gives you up to 200 cuts on a single charge thanks to ultra-efficient gearing. This is the industry's first cordless battery-powered copper pipe cutter and was engineered with plumbers, mechanical contractors, and remodelers in mind. The copper tubing cutter runs at 500 RPM, giving you unmatched cutting speed and the patent-pending cutting mechanism automatically adjusts the diameter to cut Type K, L and M copper pipes from 3/8” to 1” (OD from ½” to 1-1/8”). This close quarters copper tubing cutter has a unique rotating cutting head that allows you to cut installed copper piping with as little as 1-1/2” clearance. The lightweight pipe cutter features an in-line design, providing you with a longer reach and reduced wrist strain when working in confined spaces and has a built-in LED light that illuminates the cutting surface. The metal cutting head is corrosion and rust resistant, and sealed for water protection, while electronic overload protection and unibody construction provide additional durability. An onboard, real-time battery fuel gauge helps you monitor the charge precisely, so there’s less downtime on the job.

M12™ Drain Snake KIT

( 2571-21 )

Our M12™ Drain Snake Kit is the ultimate service plumbing solution for tough jobs through 2-1/2 inch drain lines.It weights only 10 lbs. and is the lightest professional drain cleaner on the market. Its unique, hybrid design provides you with the benefits of both handheld and floor based drain cleaners in one machine. The tool’s fixed drum shield with flat base protects you and fixtures while providing maximum tool support for easy cable feed. Plumbers, facility maintenance, and property managers will eliminate setup time when they switch from their corded drain cleaning machines to the MILWAUKEE® M12™ Drain Snake. The drain snake is powered by REDLITHIUM™ Battery Pack giving you more work per charge and more work over pack life than the competitors. REDLINK™ Intelligence provides optimized performance and overload protection against abusive situations. In addition to the drain auger, this kit includes a 5/16” X 25’ bulb cable, one M12™ REDLITHIUM™ CP1.5 battery pack, and an M12™ Lithium-Ion battery charger and 5 gallon drain snake storage bucket..

M12™ TRAPSNAKE™ 2-TOOL COMBO KIT

( 2577-21 )

Our M12™ TRAPSNAKE™ 2-Tool Combo Kit Porcelain Auger System is the ideal solution for service plumbers and maintenance crews to unclog urinals, toilets and floor traps. By offering multiple auger attachments that are compatible with a single power source, the TRAPSNAKE™ system delivers versatility and capabilities never seen before in a closet auger. The auger system is powered by our MILWAUKEE® M12™ TRAPSNAKE™ Driver and is the first powered unit optimized for the challenges of porcelain fixtures. It has power and speed to work through tough clogs in tight traps with optimized electronics that protect the fixture from the auger and allow you to feel when engaged with a blockage to aid in retrieving. TRAPSNAKE™ Auger attachments feature industry firsts, including a fixed rubber boot for maximum porcelain protection, an integrated locking mechanism which holds the cable in place for easy telescoping extension, and replaceable cables to maximize the longevity of the tool. This combo kit includes an M12™ TRAPSNAKE™ 4’ urinal auger, an M12™ TRAPSNAKE™ 6’ toilet auger, an M12™ REDLITHIUM™ CP1.5 battery pack, an M12™ Lithium-Ion battery charger and an M12™ TRAPSNAKE™ driver.

TRAPSNAKE TOILET AUGER CASE

( 48-22-2576 )

"Contain the mess with TRAPSNAKE™ Auger Cases, compatible with Milwaukee® TRAPSNAKE™ Augers and Other Professional Brand Toilet and Urinal Augers. Built with 1680D Ballistic Material, the auger cases maximize durability, and can be easily wiped down. Transport the case using the two carry handles, or store with the integrated hang hook. All cases have designated vent holes, allowing the auger to dry between jobs. Two models available: 48-22-2576 TRAPSNAKE™ Toilet Auger Case, and 48-22-2577 TRAPSNAKE™ Urinal Auger Case"

TRAPSNAKE URINAL AUGER CASE

( 48-22-2577 )

"Contain the mess with TRAPSNAKE™ Auger Cases, compatible with Milwaukee® TRAPSNAKE™ Augers and Other Professional Brand Toilet and Urinal Augers. Built with 1680D Ballistic Material, the auger cases maximize durability, and can be easily wiped down. Transport the case using the two carry handles, or store with the integrated hang hook. All cases have designated vent holes, allowing the auger to dry between jobs. Two models available: 48-22-2576 TRAPSNAKE™ Toilet Auger Case, and 48-22-2577 TRAPSNAKE™ Urinal Auger Case"

M12™ Plastic Pipe Shear (Tool Only)

( 2470-20 )

Our M12™ Plastic Pipe Shear can slice through 2 inch schedule 80 PVC in just 3 seconds. The cordless plastic pipe shear is compatible with M12™ lithium-ion batteries (not included), providing you with more than 200 cuts on a single charge. The stainless steel blade and aluminum jaw are impact, water and rust resistant. The ultra- sharp MILWAUKEE® M12™ plastic pipe shear with pierce point makes burr-free cuts, helping you cut faster, cleaner and closer than traditional shears. PVC close to a wall or mounted to a stud is no challenge for the quick-return, offset blade providing you with maximum efficiency on repetitive cuts. The plastic pipe shear features a variable speed trigger for controlled cuts in warm and cold weather and an on-board fuel gauge that displays remaining battery charge and run time, giving you the versatility and productivity you need.

M12™ ProPEX® Expansion Tool Kit

( 2432-22 )

Our M12™ ProPEX® Expansion Tool Kit features a built-in auto-rotating head providing you with convenient one-handed operation. The expansion tool features a compact right angle design allowing you to quickly and easily install tubing in tight locations. A quick cam mechanism delivers precise, continuous expansion for 3/8 in. to 1 in. ProPEX® connections while a paddle trigger allows you to easily reach confined spaces. All-metal gears and an integrated metal frame provide your tool with maximum durability on the job site. The MILWAUKEE® expansion tool is specifically for Uponor ProPEX® and is built to deliver you with faster, effortless installations. The cordless expansion tool is compatible with all Milwaukee M12™ batteries and features a built-in fuel gauge that displays remaining run-time. In addition to the expansion tool, this kit includes 1/2", 3/4", and 1" ProPEX® expansion heads, one ProPEX® expansion cone grease, two M12™ REDLITHIUM™ CP1.5 battery packs, an M12™ Lithium-Ion battery charger, and a carrying case.

M12 FUEL™ 3/8" Stubby Impact Wrench

( 2554-20 )

Our M12 FUEL™ 3/8" Stubby Impact Wrench is the industry's most compact cordless impact wrench. At only 4.8" in length, it allows you to work in tighter spaces delivering the power to complete many of the most demanding tasks and increasing your productivity. The compact impact delivers high torque with our POWERSTATE™ brushless motor. The impact wrench delivers an industry leading 250 ft.-lbs. of breakaway torque. This allows you to remove even the most stubborn bolts and fasteners. Our cordless impact wrench features built-in REDLINK™ tool technology to help you get the job done. 4-Mode Drive Control provides you with unmatched control in various fastening applications Modes 1-3 gives you precision and control for any application. An Auto-Shut-Off Mode in the 4th setting prevents over-fastening of bolts while doing reassembly work. Our MILWAUKEE® M12 FUEL 3/8" Stubby Impact Wrench is part of the M12™ battery line, featuring over 100+ powerful and compact tools.

M12 FUEL™ HACKZALL® Recip Saw (Tool Only)

( 2520-20 )

The M12 FUEL™ HACKZALL® is the fastest cutting and most powerful saw in its class, delivering over 4X more run-time, up to 70% faster cutting, and up to 6X longer tool life than competitive saws. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. Its’ light weight design is optimal for overhead cutting applications. The POWERSTATE™ Brushless Motor outperforms all leading competitors with constant power output, yet runs cooler with no wearable components. REDLINK PLUS™ Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M12™ REDLITHIUM™ XC4.0 Battery Pack (not included) provides more work per charge and more work over the life of the pack than competitive batteries. The dual gear counter balance mechanism significantly reduces vibration, providing faster starts in metal and reduced user fatigue.

Electrician Prize Pack

M12™ 600 MCM Cable Cutter Kit

( 2472-21XC )

Simplify cable cutting with the one cordless tool that fits comfortably in crowded panels and generates 5,000 pounds of force. With an open jaw, breakthrough powered ratcheting mechanism and superior blade geometry, the 600 MCM Cable Cutter fits into tight spaces and cuts effortlessly through large-diameter cable, leaving a clean, installation-ready cut. The compact size and scissor-style jaws enable cutting in crowded panels without looping, ratcheting or long arms. Ideal for electricians, datacomm, utility or service contractors or demolition crews, this cable cutter with 2-speed gear case delivers the power needed to cut large-diameter cable, and then switches into high speed to slice quickly through a variety of smaller and more common wire types. Powered by the revolutionary 12-volt REDLITHIUMTM Battery, this new cable cutter can deliver up to 150 cuts of 500 MCM copper per charge. A built-in LED light illuminates the line of cut. The Kit includes one M12TM Battery, a multi-voltage charger and carrying case.

M12™ Sub-Compact Band Saw (Tool Only)

( 2429-20 )

The Milwaukee 2429-20 M12™ Sub-Compact Band Saw is the most compact and lightest weight cordless band saw on the market. At less than half the weight and size compared to a traditional deep cut band saw, the M12™ Band Saw provides one-handed power and portability to electricians, maintenance professionals, and other users cutting small diameter materials. The M12™ Band Saw weighs only 6.75 lbs and 12” in length, making it ideal for overhead or one-handed cutting applications. This powerful saw can cut through ¾” EMT in only 3 seconds, and will get over 150 cuts per charge with the M12™ REDLITHIUM™ XC High Capacity battery. With a 1-5/8” x 1-5/8” cut capacity and low vibration, the M12™ Band Saw performs clean cuts on the most common small diameter metal cutting applications. The M12™ Band Saw also features a dual-latching lower guard that covers the blade outside the active cutting area, addressing OSHA guarding requirements and making the tool suitable for one-handed use. The tool also includes a variable speed trigger, and LED light. Backed by Milwaukee’s® 5-year warranty the 2429-20 M12™ Band Saw Bare Tool comes equipped with (1) 18 TPI metal cutting blade. Battery and charger are sold separately with this model. The M12™ Sub-Compact Cordless band saw should be used only with Milwaukee® 48-39-0572 Sub-Compact Portable Band Saw Blades.

M12™ ROCKET™ Dual Power Tower Light

( 2132-20 )

Our M12™ ROCKET™ Dual Power Tower Light is more portable and offers an all-day operation. The compact light tower is the lightest in its class with a 45% smaller footprint than our M18™ ROCKET™ Tower Lights. This allows you to easily carry and set it up in the most confined spaces. When not in use, the portable light tower collapses down to just 31" in length with three side handles allowing you to easily transport and store it. The LED tower light extends 5'8” to provide 1,400 Lumens of TRUEVIEW™ High Definition Output on high mode and 700 Lumens on low mode. The LED light tower head rotates 210° and pivots 270° allowing you to cast light in any direction. Our M12™ REDLITHIUM™ XC6.0 battery pack provides up to 10 hours of light on a single charge. The dual-powered light can also be plugged into an extension cord for all-day operation. After deployment, the portable tower light is supported by impact-resistant, reinforced legs that form a compact base with a low center of gravity to help survive any job site. The protective guard secures the head during transport and storage ensuring your tower light is always ready to use. The LEDs never need to be replaced and are backed by a limited lifetime warranty. MILWAUKEE® ROCKET™ Tower Lights are designed to deploy in seconds and built to adapt to any job site environment. The LED light towers supply both task and area lighting as well as provide light overhead to reduce shadows in the workspace.

M12 FUEL™ HACKZALL® Recip Saw Kit

( 2520-21XC )

The M12 FUEL™ HACKZALL® is the fastest cutting and most powerful saw in its class, delivering over 4X more run-time, up to 70% faster cutting, and up to 6X longer tool life than competitive saws. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. Its’ light weight design is optimal for overhead cutting applications. The POWERSTATE™ Brushless Motor outperforms all leading competitors with constant power output, yet runs cooler with no wearable components. REDLINK PLUS™ Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M12™ REDLITHIUM™ XC4.0 Battery Pack provides more work per charge and more work over the life of the pack than competitive batteries. The dual gear counter balance mechanism significantly reduces vibration, providing faster starts in metal and reduced user fatigue.

M12™ M-Spector Flex™ 9 Ft Inspection Camera Cable Kit

( 2316-21 )

The M12™ M-SPECTOR FLEX™ 9’ft Inspection Camera Cable Kit is the only contractor inspection camera that gives users the ability to see more, easier, faster. The kit’s 9’ft cable gives users extended reach in pipes and air ducts without the hassle of buying and connecting additional bulky, inflexible extensions. Leveraging state-of-the-art LED technology, users get 15X greater LED brightness for seeing further and clearer in large, dark spaces. The 12.5mm (.49”) diameter and shortened camera head length gives users easier and greater access to tight spaces than 17mm cameras. A 3.5” wireless LCD display console allows users to comfortably view images in any position. Capture best-in-class images or video on an SD card for easy documentation of warranty claims or service work for customers. The M12™ M-SPECTOR FLEX™ 9’Ft Inspection Camera Cable Kit is perfect for plumbing lines, H/VAC, facility maintenance, and residential or commercial trades where documenting inspections is essential.

M12 FUEL™ 5/8” SDS Plus Rotary Hammer (Tool Only)

( 2416-20 )

The Milwaukee® M12 FUEL™ 5/8” SDS Plus Rotary Hammer Kit provides up to 75% faster drilling, up to 70% less vibration, and up to 2X more runtime and the largest SDS Plus bit capacity in its class. Milwaukee has combined its exclusive POWERSTATE™ Brushless Motor, REDLITHIUM™ Battery Pack, and REDLINK PLUS™ Intelligence to deliver a 12V rotary hammer that rivals compact 18V tools on the market today. At only 10” long and 3.9 lbs, this tool provides performance and runtime that is comparable to a much larger tool, at a fraction of the size and weight. The electropneumatic design allows for drilling of up to 5/8” holes in concrete and masonry. For maximum versatility, regardless of application or orientation, the tool also features 2-mode operation, rotary hammer and rotation only. The kit includes 2 M12™ REDLITHIUM™ XC 4.0 Extended-Capacity Battery Packs, an M12™ Lithium-ion Battery Charger, and plastic carrying case.

M12 FUEL™ 3/8" Stubby Impact Wrench

( 2554-20 )

Our M12 FUEL™ 3/8" Stubby Impact Wrench is the industry's most compact cordless impact wrench. At only 4.8" in length, it allows you to work in tighter spaces delivering the power to complete many of the most demanding tasks and increasing your productivity. The compact impact delivers high torque with our POWERSTATE™ brushless motor. The impact wrench delivers an industry leading 250 ft.-lbs. of breakaway torque. This allows you to remove even the most stubborn bolts and fasteners. Our cordless impact wrench features built-in REDLINK™ tool technology to help you get the job done. 4-Mode Drive Control provides you with unmatched control in various fastening applications Modes 1-3 gives you precision and control for any application. An Auto-Shut-Off Mode in the 4th setting prevents over-fastening of bolts while doing reassembly work. Our MILWAUKEE® M12 FUEL 3/8" Stubby Impact Wrench is part of the M12™ battery line, featuring over 100+ powerful and compact tools.

M12™ Cordless Multi-Tool (Tool Only)

( 2426-20 )

The Milwaukee® M12™ Cordless LITHIUM-ION Multi-Tool offers versatility, power and control to complete problematic jobsite applications. Ideal for remodelers, flooring contractors, maintenance repair technicians and electricians, the cordless Multi-Tool cuts, grinds, sands and scrapes at odd angles and in areas difficult to work. It’s powered by the M12™ REDLITHIUM Battery (sold separately) to deliver up to 25% more runtime than the competition. Use it to make flush or plunge cuts, remove grout, sand and tackle other awkward jobs.  The M12 Multi-Tool operates from 5,000 to 20,000 OPM and allows users to match the speed to the application. The all-metal gear case provides added durability, while the over-molded, ergonomic handle offers extra control. With the universal adapter (included), the Multi-Tool is compatible with most competitor accessories for even greater versatility. It includes 5 assorted sanding sheets, a sanding pad and wood cutting blade. 

Transportation Maintenance Prize Pack

M12 FUEL™ 3/8" Stubby Impact Wrench Kit

( 2554-22 )

Our M12 FUEL™ 3/8" Stubby Impact Wrench is the industry's most compact cordless impact wrench. At only 4.8" in length, it allows you to work in tighter spaces delivering the power to complete many of the most demanding tasks and increasing your productivity. The compact impact delivers high torque with our POWERSTATE™ brushless motor. The impact wrench delivers an industry leading 250 ft.-lbs. of breakaway torque. This allows you to remove even the most stubborn bolts and fasteners. Our cordless impact wrench features built-in REDLINK™ tool technology to help you get the job done. 4-Mode Drive Control provides you with unmatched control in various fastening applications Modes 1-3 gives you precision and control for any application. An Auto-Shut-Off Mode in the 4th setting prevents over-fastening of bolts while doing reassembly work. Our MILWAUKEE® M12 FUEL 3/8" Stubby Impact Wrench is part of the M12™ battery line, featuring over 100+ powerful and compact tools. The kit includes one M12™ REDLIHTIUM™ CP2.0 battery pack, one 12™ REDLITHIUM™ XC4.0 Extended Capacity battery pack, and one M12™ Lithium-Ion battery charger.

M12 FUEL™ 3/8" Extended Reach Ratchet Kit

( 2560-21 )

Our M12 FUEL™ 3/8" Extended Reach Ratchet is the latest addition to our best-in-class lineup of battery powered ratchets. These MILWAUKEE® M12 FUEL ratchets provide industry leading torque output with a slim head profile and an extended neck that give you the longest reach in tight spaces. The long neck electric ratchet features an Investment Cast Steel Yoke housing and a POWERSTATE™ Brushless Motor that deliver superior durability you expect from Milwaukee. The long reach electric ratchets are the ideal addition to any tool chest; allowing you to get to stubborn, hard to reach fasteners without the concern of knuckle busting, The 3/8" cordless ratchet provides the performance of a pneumatic ratchet with up to 55 ft-lbs max torque, the same torque output as our M12 FUEL™ Ratchets.

M12™ FUEL™ 1/2" Ratchet Bare Tool

( 2558-20 )

Our M12™ FUEL™ 1/2" Ratchet is the first cordless tool that provides both the torque and compact size to replace pneumatic ratchets in the industry. This cordless ratchet has up to 60ft-lbs of max torque and 175rpm's making it the ideal fastening solution for automotive mechanics, repair technicians and maintenance workers who demand maximum performance and convenient portability. The M12™ battery powered ratchet has a low profile head and cordless design which allows you more access in tight spaces than competitive units. With the industry leading FUEL™ technology, a reinforced mechanism and investment cast steel yoke housing, this rechargeable ratchet can withstand daily jobsite wear and tear for years of reliable use. The MILWAUKEE® cordless ratchet has eliminated the constant maintenance of pneumatic ratchets and the nuisance of an air hose in the shop. The M12™ FUEL™ Ratchet delivers the maximum portability and productivity for the professional user.

M12™ FUEL™ 3/8" Ratchet Bare Tool

( 2557-20 )

Our M12™ FUEL™ 3/8" Ratchet is the first cordless tool that provides both the torque and compact size to replace pneumatic ratchets in the industry. This cordless ratchet has up to 55ft-lbs of max torque and 200rpm's making it the ideal fastening solution for automotive mechanics, repair technicians and maintenance workers who demand maximum performance and convenient portability. The M12™ battery powered ratchet has a low profile head and cordless design which allows you more access in tight spaces than competitive units. With the industry leading FUEL™ technology, a reinforced mechanism and investment cast steel yoke housing, this rechargeable ratchet can withstand daily jobsite wear and tear for years of reliable use. Milwaukee’s cordless ratchet has eliminated the constant maintenance of pneumatic ratchets and the nuisance of an air hose in the shop. The M12™ FUEL™ Ratchet delivers the maximum portability and productivity for the professional user.

M12™ Rivet Tool Kit

( 2550-22 )

The M12™ Rivet Tool is the first cordless solution that delivers fast, easy riveting while maintaining performance, durability, and size. The 2550 can pull up to 250 3/16" stainless steel rivets or 450 1/8" steel rivets on one charge with a 1.5ah battery, and reduces muscle effort from a hand tool by 60%. No compressors or hoses during set up and operation makes this tool a great replacement to pneumatic products. 2X longer life over current cordless solutions delivers greater durability from common jobsite conditions and use. This is the most compact cordless rivet tool on the market, measuring only 6.5” in length allowing users more access in tight spaces. The M12 Rivet Tool is part of the M12 battery platform, offering 90+ solutions on one battery system.

M12™ Underhood Light

( 2125-20 )

Our M12™ Underhood Light Shines Brighter, Grips Stronger, and Protects Longer. The LED underhood work light delivers 1350 lumens of TRUEVIEW™ High Definition Output for full engine coverage and clarity. Our FINISHGUARD™ hooks resist wear, providing long-lasting protection against scratches to your vehicle’s finish. The LED light bar features 2X more gripping surface to help you get more contact for better positioning when mounting underhood, undercarriage or elsewhere. You can rotate, slide, remove and hang the light bar for added flexibility and versatility. The carrier extends 47”-78” to fit wide cars and trucks. It is perfect for mechanics working in automotive shops or fleet maintenance. The LED underhood light features up to 8 hours of runtime when powered by our M12™ REDLITHIUM™ XC4.0 Battery Pack. This light is impact and chemical resistant, built to withstand the toughest environments. The high-quality LEDs never need to be replaced and are backed by a limited lifetime warranty.

M12™ Compact Inflator

( 2475-20 )

FASTEST CORDLESS TIRE INFLATOR. The Milwaukee® M12™ Compact Inflator delivers fast, accurate, easy inflation with the portability to take anywhere. With the capability to complete demanding applications like car, LT truck, and compact equipment tires, the M12™ Compact Inflator gives users ultimate power and efficiency. Rated to deliver over 120PSI, The high efficiency motor and pump top-off car tires in under 1 minute. The TrueFill™ Auto shut-off technology delivers highly accurate pressure, protects from overfill, and automatically senses speed of fill to deliver precise shut-off at the desired PSI. Additionally, the unit includes a large easy to read back-lit LCD, anti-vibration feet, and 26” inch hose with an all brass Schrader chuck.

M12™ Cordless LITHIUM-ION Grease Gun Kit

( 2446-21XC )

Get up to 25% more pressure, best-in-class runtime, and compatibility with tools for drilling, fastening, lighting and cutting. The M12TM Cordless Lithium-Ion Grease Gun delivers the highest max operating pressure in its class to help you handle heavy-duty applications and eliminate downtime. It’s capable of delivering more than 8,000 PSI max operating pressure for heavy machinery, cold weather applications and clogged grease fittings. The M12 REDLITHIUMTM Battery lets you dispense up to seven grease cartridges per charge and is compatible with a variety of Milwaukee tools for greater workplace versatility. A lightweight, ergonomic handle offers greater comfort during prolonged use, and an onboard hose storage and shoulder strap loop offer convenience with less mess. The kit comes with one 12-volt extended capacity battery, a 60-minute charger, 36” flex hose with spring guard and grease coupler and a carrying case.

M12 FUEL™ 1/4" Stubby Impact Wrench

( 2552-20 )

Our M12 FUEL™ 1/4" Stubby Impact Wrench is the industry's most compact cordless impact wrench. At only 5.1" in length, it allows you to work in tighter spaces delivering the power to complete many of the most demanding tasks and increasing your productivity. The compact impact delivers high torque with our POWERSTATE™ brushless motor. The impact wrench delivers an industry leading 100 ft.-lbs. of breakaway torque. This allows you to remove even the most stubborn bolts and fasteners. Our cordless impact wrench features built-in REDLIINK™ tool technology to help you get the job done. 4-Mode Drive Control provides you with unmatched control in various fastening applications Modes 1-3 gives you precision and control for any application. An Auto-Shut-Off Mode in the 4th setting prevents over-fastening of bolts while doing reassembly work. Our MILWAUKEE® M12 FUEL ¼” Stubby Impact Wrench is part of the M12™ battery line, featuring over 100+ powerful and compact tools.

Facility Maintenance Prize Pack

M12 FUEL™ SURGE™ 1/4" Hex Hydraulic Driver 2 Battery Kit

( 2551-22 )

Our M12 FUEL SURGE™ ¼” Hex Hydraulic Driver is the industry's first 12-volt hydraulic driver. Featuring our FLUID-DRIVE™ Hydraulic Powertrain, the hydraulic driver will let you experience operation up to 2X quieter with less vibration for smoother and faster driving speeds compared to standard impacts. The compact size of the tool and battery give you unmatched access in tight spaces and allows for easy transport on a tool belt and easy fitting into your job site tool bag. The POWERSTATE™ Brushless Motor delivers up to 0-3,200 RPM with constant power output to drive screws faster. Built-in REDLINK PLUS™ Intelligence is the most advanced electronic system on the market, preventing damage to your tool and battery caused by overloading or overheating. The cordless hydraulic driver is compatible with all Milwaukee® M12™ REDLITHIUM™ Compact Batteries or Extended Capacity Batteries, providing you with more work per charge and more work over the life of the pack than competitive batteries. The impact driver's 4-Mode DRIVE CONTROL gives you greater control over output speed and power for greater versatility in a wide range of applications. Self-Tapping Screw Mode reduces walking when you are self-tapping screws as well as reduces overdriving, breaking and stripping out screws.

M12 FUEL™ 2-Tool Combo Kit: 1/2" Hammer Drill and 1/4" Hex Impact Driver

( 2598-22 )

The 2598-22 M12 FUEL 2-Tool Combo Kit is the Most Capable and Most Compact 12-Volt Hammer Drill Driver and Impact Driver Combo Kit on the market. Included is the M12 FUEL Hammer Drill Driver (2504-20), the Most Capable, Lightest Weight and Most Compact 12-Volt Hammer Drill Driver in the market. At only 6.6 and 2.8 lbs. of weight it is the best Hammer Drill Driver to use in compact spaces. It delivers the power to do a wide variety of applications at 1700 RPMs and 350 in./lbs. of torque. Also included, the M12 FUEL Hex Impact (2553-20), the Fastest Driving Speed, Most Compact with 4- Mode Drive Control Impact Driver in the market. At 3,300 RPM the impact drives screws over 20% faster than competitors. At 5.1 in. L it allows for unmatched access in tight spaces. The 4-Mode DRIVE CONTROL provides greater control over output speed and power for greater versatility by delivering 0-1,300 RPM in Mode 1, 0-2,400 RPM in Mode 2 and 0-3,300 RPM in Mode 3. Mode 4 is Self-Tapping Screw Mode which is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.

M12 FUEL™ Installation Drill/Driver Kit

( 2505-22 )

Our M12 FUEL™ Installation Drill/Driver Kit features 4 dedicated solutions, delivering unrivaled access and control with up to 300 in-lbs of max torque. Four dedicated heads, including a 3/8” Chuck, Offset Driver, ¼” Hex, and Right Angle, can attach in 16 different positions. This provides you with a 4-in-1 drilling and driving solution that is purposefully designed to reach uniquely challenging locations. The compact drill driver features a slim tool profile and an inline grip in the back of the tool that provides ultimate tool control and unrivaled access. The top of the tool is flat, allowing the tool to be placed flush against surfaces for additional access when needed. The front of the tool is equipped with a magnetic bit holder that securely holds multiple bits, enhancing your productivity. These unique features combine with the tool’s compact size and weight allowing you to maneuver the multi-head drill/driver for maximum versatility and best access in hard to reach places. The modular drill/driver is equipped with a POWERSTATE™ Brushless Motor, delivering you with 1600 RPMS and 300 in./lbs of torque. This provides you with the necessary power for installation applications, especially in electrical, cabinet installation, MRO, HVAC, automotive, and remodel applications. The installation drill/driver features REDLINK Plus™ Intelligence, protecting your tool from overloading or overheating. The compact cordless drill/driver is powered by our M12™ REDLITHIUM™ battery packs, delivering you with more run-time per charge and more work over the life of the pack. In addition to the 12-volt tool and four attachments, a compartmentalized contractor bag is included to hold each individual head. This kit also includes two M12™ REDLITHIUM™ CP2.0 battery packs (48-11-2420) and an M12™ Charger (48-59-2401).

M12 FUEL™ 3" Compact Cut Off Tool - Kit

( 2522-21XC )

The M12 FUEL™ 3" Compact Cut Off Tool delivers multi-material cutting capability in an ergonomic package, optimized for one-handed use. Spinning at 20,000 RPM and featuring a POWERSTATE™ Brushless Motor, the 2522 delivers fast and accurate cutting performance in a wide range of materials. The unique reversible blade rotation feature provides users ultimate control over material removal, along with the ability to select their desired blade rotation for the direction they need to cut. For ultimate cutting versatility, the 2522 ships with three accessories: a metal cut off wheel, a diamond tile blade, and a carbide abrasive blade. The M12 FUEL™ 3" Compact Cut Off Tool also includes a tool free accessory guard & shoe that includes a vacuum adapter for dust mitigation as well as cut depth adjustment. Lastly, the tool also features tool free guard adjustment and an LED light.

M12™ 102 X 77 Infrared Camera Kit

( 2258-21 )

The M12™ 102 X 77 Infrared Camera is the first imager in its class to deliver oustanding 7,800+ pixel image detail for superior scanning than single-point infrared thermometers. Leverage Milwaukee® exclusive DUAL SENSE™  pixel technology to get crisp images of heat loss, electrical resistance, water damage and mechanical issues. On-screen temperature readout and 83:1 Distance-to-Spot ratio  gives users precise, real-time measurements from a distance. Capture, store and share images using the included SD card and USB cable. Fully compatible with Milwaukee® Thermal Imager Reporting Software for archiving, analyzing and reporting.

M12™ ROVER™ Mounting Flood Light

( 2364-20 )

Our M12™ Rover™ Mounting Flood Light allows you to take light anywhere and hang it everywhere. Equipped with strong magnets, a spring-loaded clamp, keyhole hanger, and a wire hanger, it’s built to adapt to any work environment. This flood light provides up to 1,000 lumens of TRUEVIEW™ High Definition Output capable of lighting up a large workspace for extended periods. The M12™ Flood Light has an impact and chemical resistant lens able to withstand the toughest of jobsite conditions. ROVER™ Flood Lights are built to go anywhere and withstand anything.

M12™ 1/4" Hex Screwdriver (Tool Only)

( 2401-20 )

Optimized for the professional who frequently encounters precision fastening applications, the Milwaukee® M12™ ¼” Hex Screwdriver delivers unmatched precision, power and portability along with a slimmer, more ergonomic grip. A variable speed trigger and 0-500RPM give the user unrivaled fastening control, 15+1 clutch settings prevent over tightening fasteners, and 175 in-lbs. of torque provides the ability to accomplish tough applications. At 6-1/2 in. long and weighing only 2.0lbs; its compact, lightweight and durable design provides greater comfort and fits in tighter spaces on the jobsite. The onboard LED light and fuel gauge help you increase productivity and avoid interruptions. Two belt-clip positions for both left- and right-handed users and one-handed bit changes provide maximum ease-of-use. The REDLITHIUM™ Battery Pack delivers more work per charge and more work over pack life than the competitors.

M12 FUEL™ 5/8” SDS Plus Rotary Hammer Kit

( 2416-21XC )

The Milwaukee® M12 FUEL™ 5/8” SDS Plus Rotary Hammer Kit provides up to 75% faster drilling, up to 70% less vibration, and up to 2X more runtime and the largest SDS Plus bit capacity in its class. Milwaukee has combined its exclusive POWERSTATE™ Brushless Motor, REDLITHIUM™ Battery Pack, and REDLINK PLUS™ Intelligence to deliver a 12V rotary hammer that rivals compact 18V tools on the market today. At only 10” long and 3.9 lbs, this tool provides performance and runtime that is comparable to a much larger tool, at a fraction of the size and weight. The electropneumatic design allows for drilling of up to 5/8” holes in concrete and masonry. For maximum versatility, regardless of application or orientation, the tool also features 2-mode operation, rotary hammer and rotation only. The kit includes 2 M12™ REDLITHIUM™ XC 4.0 Extended-Capacity Battery Packs, an M12™ Lithium-ion Battery Charger, and plastic carrying case.

Remodeler Prize Pack

M12 FUEL™ SURGE™ 1/4" Hex Hydraulic Driver 2 Battery Kit

( 2551-22 )

Our M12 FUEL SURGE™ ¼” Hex Hydraulic Driver is the industry's first 12-volt hydraulic driver. Featuring our FLUID-DRIVE™ Hydraulic Powertrain, the hydraulic driver will let you experience operation up to 2X quieter with less vibration for smoother and faster driving speeds compared to standard impacts. The compact size of the tool and battery give you unmatched access in tight spaces and allows for easy transport on a tool belt and easy fitting into your job site tool bag. The POWERSTATE™ Brushless Motor delivers up to 0-3,200 RPM with constant power output to drive screws faster. Built-in REDLINK PLUS™ Intelligence is the most advanced electronic system on the market, preventing damage to your tool and battery caused by overloading or overheating. The cordless hydraulic driver is compatible with all Milwaukee® M12™ REDLITHIUM™ Compact Batteries or Extended Capacity Batteries, providing you with more work per charge and more work over the life of the pack than competitive batteries. The impact driver's 4-Mode DRIVE CONTROL gives you greater control over output speed and power for greater versatility in a wide range of applications. Self-Tapping Screw Mode reduces walking when you are self-tapping screws as well as reduces overdriving, breaking and stripping out screws.

M12™ 3/8" Crown Stapler Kit

( 2447-21 )

The Milwaukee M12™ 3/8” Crown Stapler delivers a true hand tool replacement. The 2447 is designed to drive a range of 3/8” flat crown staples (1/4” – 9/16”) through an array of materials and substrates. At just 3.4 lbs and 7.25” long the compact design allows for great access into tight spaces and convenient tool belt portability. An easy to squeeze trigger design significantly reduces fatigue associated with traditional hand staplers. Integrated sequential and contact actuation trigger design provides increased productivity and seamless changing between firing modes. The 2447 is compatible with all Milwaukee M12™ batteries, and carries Milwaukee’s 5-Year limited power tool warranty.

M12 FUEL™ Installation Drill/Driver Kit

( 2505-22 )

Our M12 FUEL™ Installation Drill/Driver Kit features 4 dedicated solutions, delivering unrivaled access and control with up to 300 in-lbs of max torque. Four dedicated heads, including a 3/8” Chuck, Offset Driver, ¼” Hex, and Right Angle, can attach in 16 different positions. This provides you with a 4-in-1 drilling and driving solution that is purposefully designed to reach uniquely challenging locations. The compact drill driver features a slim tool profile and an inline grip in the back of the tool that provides ultimate tool control and unrivaled access. The top of the tool is flat, allowing the tool to be placed flush against surfaces for additional access when needed. The front of the tool is equipped with a magnetic bit holder that securely holds multiple bits, enhancing your productivity. These unique features combine with the tool’s compact size and weight allowing you to maneuver the multi-head drill/driver for maximum versatility and best access in hard to reach places. The modular drill/driver is equipped with a POWERSTATE™ Brushless Motor, delivering you with 1600 RPMS and 300 in./lbs of torque. This provides you with the necessary power for installation applications, especially in electrical, cabinet installation, MRO, HVAC, automotive, and remodel applications. The installation drill/driver features REDLINK Plus™ Intelligence, protecting your tool from overloading or overheating. The compact cordless drill/driver is powered by our M12™ REDLITHIUM™ battery packs, delivering you with more run-time per charge and more work over the life of the pack. In addition to the 12-volt tool and four attachments, a compartmentalized contractor bag is included to hold each individual head. This kit also includes two M12™ REDLITHIUM™ CP2.0 battery packs (48-11-2420) and an M12™ Charger (48-59-2401).

M12™ Cordless LITHIUM-ION Multi-Tool Kit

( 2426-21 )

The Milwaukee® M12™ Cordless LITHIUM-ION Multi-Tool Kit offers versatility, power and control to complete problematic jobsite applications. Ideal for remodelers, flooring contractors, maintenance repair technicians and electricians, the cordless Multi-Tool cuts, grinds, sands and scrapes at odd angles and in areas difficult to work. It’s powered by the M12™ REDLITHIUM Battery to deliver up to 25% more runtime than the competition. Use it to make flush or plunge cuts, remove grout, sand and tackle other awkward jobs.  The M12 Multi-Tool operates from 5,000 to 20,000 OPM and allows users to match the speed to the application. The all-metal gear case provides added durability, while the over-molded, ergonomic handle offers extra control. With the universal adapter (included), the Multi-Tool is compatible with most competitor accessories for even greater versatility. The kit includes an M12 REDLITHIUM Battery and charger, 5 assorted sanding sheets, sanding pad, wood cutting blade and contractor bag.

M12 FUEL™ HACKZALL® Recip Saw (Tool Only)

( 2520-20 )

The M12 FUEL™ HACKZALL® is the fastest cutting and most powerful saw in its class, delivering over 4X more run-time, up to 70% faster cutting, and up to 6X longer tool life than competitive saws. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. Its’ light weight design is optimal for overhead cutting applications. The POWERSTATE™ Brushless Motor outperforms all leading competitors with constant power output, yet runs cooler with no wearable components. REDLINK PLUS™ Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M12™ REDLITHIUM™ XC4.0 Battery Pack (not included) provides more work per charge and more work over the life of the pack than competitive batteries. The dual gear counter balance mechanism significantly reduces vibration, providing faster starts in metal and reduced user fatigue.

M12 FUEL™ 5-3/8" Circular Saw (Tool Only)

( 2530-20 )

With a cut capacity of 1-5/8" for cutting 2x dimensional lumber, the M12 FUEL™ 5-3/8" circular saw, delivers up to 170 cuts per charge and up to 2X the motor life of competitive products.With the ability to cut a wide range of common jobsite materials, the M12™ circular saw was designed to deliver the power, run-time and durability required by professionals. The POWERSTATE™ Brushless Motor outperforms all leading competitors with constant power output, yet runs cooler with no wearable components. REDLINK PLUS™ Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M12™ REDLITHIUM™ XC4.0 Battery Pack provides more work per charge and more work over the life of the pack than competitive batteries.The M12 FUEL™ 5-3/8" circular saw features a built in LED light for great cutline visibility and all aluminum guards and shoe for increased durability on the jobsite.

M12™ Cordless High Performance Jig Saw Kit

( 2445-21 )

Milwaukee Electric Tool introduces the next generation in cordless cutting with the M12™ Cordless High Performance Jig Saw.  With its innovative Hybrid Grip™ design, the M12™ Jig Saw is the most compact, lightest weight professional cordless jig saw on the market.  The saw’s cutting power and control delivers an incredible portable cutting solution for a wide range of trade applications.  Powered by the M12™ RED LITHIUM™ battery system, the tool is ideal for trim carpenters, remodelers, cabinet/countertop installers, plumbers, electricians, and HVAC professionals for making quick cuts in wood, metal, wall tile, or plastics without the hassle of pulling out a cord. The Hybrid Grip™ handle design combines the best features from both top handle and barrel grip jig saws to provide superior cut control.  The low center of gravity grip is ideal for precision during curved cutting applications.  A ¾” stroke length and 0-2,800 SPM variable speed trigger deliver fast and accurate cuts in multiple materials.  The Quik-Lok™ T-Shank blade clamp and tool free 450 bevel capability allow for quick and easy tool adjustments.  An LED light highlights the cutting surface for improved visibility.  The M12™ Jig Saw is designed to minimize vibration by using a fully counterbalanced mechanism and positioning the limited tool weight directly over the cutting area.  Backed by Milwaukee’s® 5-year warranty the 2445-21 comes equipped with (1) M12™ RED LITHIUM™ compact battery, 30-minute charger, (1) 10 TPI wood cutting blade, anti-splintering insert, non-marring shoe, and contractor bag.

M12 FUEL™ 1/2" Hammer Drill Kit

( 2504-22 )

The M12 FUEL™ Hammer Drill Driver is the Most Capable, Lightest Weight, Most Compact tool in its class. The POWERSTATE™ Brushless Motor delivers the power to do a wide variety of applications at 1700 RPM’s and 350in.lbs. of torque. Weighing only 2.3lbs it is extremely portable, great for overhead applications, reduces fatigue throughout the day. At 6.6" in length this tool has the best access in tight spaces. REDLINK™ Plus intelligence protects the tool from overloads and overheating while ensuring maximum performance. Using REDLITHIUM™ 2.0Ah compact and 4.0Ah extended capacity battery packs they deliver more work per charge and more work over the life of the pack than competitive batteries.

M12™ ROCKET™ Dual Power Tower Light

( 2132-20 )

Our M12™ ROCKET™ Dual Power Tower Light is more portable and offers an all-day operation. The compact light tower is the lightest in its class with a 45% smaller footprint than our M18™ ROCKET™ Tower Lights. This allows you to easily carry and set it up in the most confined spaces. When not in use, the portable light tower collapses down to just 31" in length with three side handles allowing you to easily transport and store it. The LED tower light extends 5'8” to provide 1,400 Lumens of TRUEVIEW™ High Definition Output on high mode and 700 Lumens on low mode. The LED light tower head rotates 210° and pivots 270° allowing you to cast light in any direction. Our M12™ REDLITHIUM™ XC6.0 battery pack provides up to 10 hours of light on a single charge. The dual-powered light can also be plugged into an extension cord for all-day operation. After deployment, the portable tower light is supported by impact-resistant, reinforced legs that form a compact base with a low center of gravity to help survive any job site. The protective guard secures the head during transport and storage ensuring your tower light is always ready to use. The LEDs never need to be replaced and are backed by a limited lifetime warranty. MILWAUKEE® ROCKET™ Tower Lights are designed to deploy in seconds and built to adapt to any job site environment. The LED light towers supply both task and area lighting as well as provide light overhead to reduce shadows in the workspace.

General Prize Pack

M12 FUEL™ 2-Tool Combo Kit: 1/2" Hammer Drill and 1/4" Hex Impact Driver

( 2598-22 )

The 2598-22 M12 FUEL 2-Tool Combo Kit is the Most Capable and Most Compact 12-Volt Hammer Drill Driver and Impact Driver Combo Kit on the market. Included is the M12 FUEL Hammer Drill Driver (2504-20), the Most Capable, Lightest Weight and Most Compact 12-Volt Hammer Drill Driver in the market. At only 6.6 and 2.8 lbs. of weight it is the best Hammer Drill Driver to use in compact spaces. It delivers the power to do a wide variety of applications at 1700 RPMs and 350 in./lbs. of torque. Also included, the M12 FUEL Hex Impact (2553-20), the Fastest Driving Speed, Most Compact with 4- Mode Drive Control Impact Driver in the market. At 3,300 RPM the impact drives screws over 20% faster than competitors. At 5.1 in. L it allows for unmatched access in tight spaces. The 4-Mode DRIVE CONTROL provides greater control over output speed and power for greater versatility by delivering 0-1,300 RPM in Mode 1, 0-2,400 RPM in Mode 2 and 0-3,300 RPM in Mode 3. Mode 4 is Self-Tapping Screw Mode which is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.

M12 FUEL™ HACKZALL® Recip Saw (Tool Only)

( 2520-20 )

The M12 FUEL™ HACKZALL® is the fastest cutting and most powerful saw in its class, delivering over 4X more run-time, up to 70% faster cutting, and up to 6X longer tool life than competitive saws. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. Its’ light weight design is optimal for overhead cutting applications. The POWERSTATE™ Brushless Motor outperforms all leading competitors with constant power output, yet runs cooler with no wearable components. REDLINK PLUS™ Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M12™ REDLITHIUM™ XC4.0 Battery Pack (not included) provides more work per charge and more work over the life of the pack than competitive batteries. The dual gear counter balance mechanism significantly reduces vibration, providing faster starts in metal and reduced user fatigue.

M12™ ROVER™ Mounting Flood Light

( 2364-20 )

Our M12™ Rover™ Mounting Flood Light allows you to take light anywhere and hang it everywhere. Equipped with strong magnets, a spring-loaded clamp, keyhole hanger, and a wire hanger, it’s built to adapt to any work environment. This flood light provides up to 1,000 lumens of TRUEVIEW™ High Definition Output capable of lighting up a large workspace for extended periods. The M12™ Flood Light has an impact and chemical resistant lens able to withstand the toughest of jobsite conditions. ROVER™ Flood Lights are built to go anywhere and withstand anything.

M12™ Compact Inflator

( 2475-20 )

FASTEST CORDLESS TIRE INFLATOR. The Milwaukee® M12™ Compact Inflator delivers fast, accurate, easy inflation with the portability to take anywhere. With the capability to complete demanding applications like car, LT truck, and compact equipment tires, the M12™ Compact Inflator gives users ultimate power and efficiency. Rated to deliver over 120PSI, The high efficiency motor and pump top-off car tires in under 1 minute. The TrueFill™ Auto shut-off technology delivers highly accurate pressure, protects from overfill, and automatically senses speed of fill to deliver precise shut-off at the desired PSI. Additionally, the unit includes a large easy to read back-lit LCD, anti-vibration feet, and 26” inch hose with an all brass Schrader chuck.

M12 FUEL™ 3/8" Stubby Impact Wrench Kit

( 2554-22 )

Our M12 FUEL™ 3/8" Stubby Impact Wrench is the industry's most compact cordless impact wrench. At only 4.8" in length, it allows you to work in tighter spaces delivering the power to complete many of the most demanding tasks and increasing your productivity. The compact impact delivers high torque with our POWERSTATE™ brushless motor. The impact wrench delivers an industry leading 250 ft.-lbs. of breakaway torque. This allows you to remove even the most stubborn bolts and fasteners. Our cordless impact wrench features built-in REDLINK™ tool technology to help you get the job done. 4-Mode Drive Control provides you with unmatched control in various fastening applications Modes 1-3 gives you precision and control for any application. An Auto-Shut-Off Mode in the 4th setting prevents over-fastening of bolts while doing reassembly work. Our MILWAUKEE® M12 FUEL 3/8" Stubby Impact Wrench is part of the M12™ battery line, featuring over 100+ powerful and compact tools. The kit includes one M12™ REDLIHTIUM™ CP2.0 battery pack, one 12™ REDLITHIUM™ XC4.0 Extended Capacity battery pack, and one M12™ Lithium-Ion battery charger.

M12 FUEL™ 5-3/8" Circular Saw (Tool Only)

( 2530-20 )

With a cut capacity of 1-5/8" for cutting 2x dimensional lumber, the M12 FUEL™ 5-3/8" circular saw, delivers up to 170 cuts per charge and up to 2X the motor life of competitive products.With the ability to cut a wide range of common jobsite materials, the M12™ circular saw was designed to deliver the power, run-time and durability required by professionals. The POWERSTATE™ Brushless Motor outperforms all leading competitors with constant power output, yet runs cooler with no wearable components. REDLINK PLUS™ Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M12™ REDLITHIUM™ XC4.0 Battery Pack provides more work per charge and more work over the life of the pack than competitive batteries.The M12 FUEL™ 5-3/8" circular saw features a built in LED light for great cutline visibility and all aluminum guards and shoe for increased durability on the jobsite.

M12™ Heated TOUGHSHELL™ Jacket Kit

( 202-21 )

Our heated TOUGHSHELL™ jacket is powered by our powerful M12™ REDLITHIUM™ batteries. Each heated jacket uses carbon fiber heating elements to create and distribute heat to your chest, back and front hand pockets. A one-touch LED controller heats up the battery heated jacket to three heat settings, creating a comfortable heat for any environment or weather. This MILWAUKEE® heated jacket has a new Quick-Heat function that allows you to feel heat three times faster than our previous jackets and market competitors. Like all of our other products, our jackets are built strong to last long with TOUGHSHELL™ stretch polyester delivering five times longer jacket life than our previous Softshell heated jackets. The durable material also provides wind and water resistance to survive the elements whether you are on the worksite or enjoying the outdoors. The heated coats are available in black, red and gray options with sizes ranging from small to 3XL.

M12™ Spot Light

( 2353-20 )

Our M12™ Spot Light delivers up to 750 lumens of TRUEVIEW™ High Definition Output, making it the most portable, high-performing spotlight. This hand-held spotlight features high and low output modes of operation for versatile beam distance control and added clarity in closer situations. The LED light features a beam distance of 700 Yards, allowing you to spot objects and areas a long-distance away. We’ve added a strobe mode for use in safety situations and the spotlight is impact and water-resistant to survive professional use. We back our rechargeable LED spotlight with a Limited Lifetime Warranty, the LEDs never need to be replaced.

M12™ Cordless High Performance Jig Saw Kit

( 2445-21 )

Milwaukee Electric Tool introduces the next generation in cordless cutting with the M12™ Cordless High Performance Jig Saw.  With its innovative Hybrid Grip™ design, the M12™ Jig Saw is the most compact, lightest weight professional cordless jig saw on the market.  The saw’s cutting power and control delivers an incredible portable cutting solution for a wide range of trade applications.  Powered by the M12™ RED LITHIUM™ battery system, the tool is ideal for trim carpenters, remodelers, cabinet/countertop installers, plumbers, electricians, and HVAC professionals for making quick cuts in wood, metal, wall tile, or plastics without the hassle of pulling out a cord. The Hybrid Grip™ handle design combines the best features from both top handle and barrel grip jig saws to provide superior cut control.  The low center of gravity grip is ideal for precision during curved cutting applications.  A ¾” stroke length and 0-2,800 SPM variable speed trigger deliver fast and accurate cuts in multiple materials.  The Quik-Lok™ T-Shank blade clamp and tool free 450 bevel capability allow for quick and easy tool adjustments.  An LED light highlights the cutting surface for improved visibility.  The M12™ Jig Saw is designed to minimize vibration by using a fully counterbalanced mechanism and positioning the limited tool weight directly over the cutting area.  Backed by Milwaukee’s® 5-year warranty the 2445-21 comes equipped with (1) M12™ RED LITHIUM™ compact battery, 30-minute charger, (1) 10 TPI wood cutting blade, anti-splintering insert, non-marring shoe, and contractor bag.